
LOCATION: 3 miles West of Hagansport, TX 100 yds North of the NE intersection of FM 71 and NW 1081.
Located 5 miles East of Sulphur Bluff, TX.
Located 13 miles NW of Mount Vernon, TX.
Located 21 miles NE of Sulphur Springs, TX.
Located 30 miles South of Paris, TX.
Located 80 miles NE of Dallas, TX.
also located 136 miles from DFW airport and 45 miles from the Texas Oklahoma border.
![]()
From Dallas: Take LBJ Freeway (I-635) to the Northeast. Exit on I-30 going East to Rockwall. Continue on I-30 to Mt. Vernon. Take exit 146 -- Hwy 37 North (Left) to Hagansport (very small two way stop with feed store and hamburgers on NE corner).
Turn West (Left) on FM 71 for 3 miles to County Road NW 1081(on your right). Go North (right) for 100 yard and the property starts on your right. The tracts are well marked with signs on the fence marking the left and right side of each tract. The Front building line & back property pins are also marked with metal fence posts.
From Peaceful Meadows: Take County Road 3564 back to Dike and FM 69. Continue North on FM 69 to Sulfur Bluff (approx 13 miles). Go East (right) on FM 71 for 5 miles to County Road NW 1081 on your left. (This will be just after you cross into Franklin County -- and there is a NW 1081 on your right first.) Turn North (left) and go 100 yards. The tracts are well marked with signs on the fence marking the left and right side of each tract. The Front building line & back property pins are also marked with metal fence posts.
From Paris TX: Take Hwy 271 Southeast to FM 37 (29 miles). Turn Right (South) on FM 37 -- go 9 miles to FM 71 at Hagansport (very small two way stop with feed store and hamburgers on NE corner) Turn Right (West) & go 3 miles to CR 1081(on your right) and take a right -- the property starts in 100 yds. (The next County Road after NW 1080 is NW 1081 -- note that on some maps this County Road is marked as NW 1080 as it used to be a loop.) The tracts are well marked with signs on the fence marking the left and right side of each tract. The Front building line & back property pins are also marked with metal fence posts.
![]()
Contact Kit Campbell @ 903.825.2501,